0% Financing for 24 Months! + 24% OFF Any Job Scheduled During the Winter Season

Our Services

Home » Our Services

Why Brick Pavers?

When it comes to choosing a pavement surface that combines beauty, strength, color, texture and durability. It’s hard to look any further than interlocking brick pavers. Brick pavers are the perfect answer for driveways, walkways and patios. The wide range of styles and shapes gives the design flexibility to create the most imaginative layouts and patterns. The vast choices of vibrant colors open the possibilities to match virtually any color scheme that any homeowner can dream of.

You Will Be Amazed at These Before and After Brick Paving Photos

Eco Friendly & Cost Effective

All things considered, brick paver projects have the lowest life-cycle costs when being compared to traditional concrete projects. Pavers are a great alternative to concrete because pavers can be reused in the future and reset with a new base. Pavers do tend to cost more than concrete, but the value for homeowners really kicks in when it comes time to re-level your pavers in 10-15 years. Replacing concrete costs a lot more than re-leveling existing pavers.

Concrete on the other hand will eventually crack, which means new materials and reinforcement steel will need to be purchased again.  

Brick Paver Repair

Rule of Thumb: Paver Base

The minimum base thickness over well-drained soils (base gravel), after compaction, is:

  • 4” thick = ~2 tons
  • 6” thick = ~3 tons
  • 8” thick = ~4 tons
  • 12” thick = ~6 tons

The following tons of material will be needed/thickness shown:

  • 4”-6” for residential walks and patios
  • 6-8” for pool decks
  • 8-12” for residential driveways
  • (For each 100SqFt of base area)

Schedule Your Free Estimate with “It’s The Brick Guys”

See For Yourself If We Don’t Deliver on Everything We’ve Promised

The minimal maintenance over the lifetime of a brick pavement project far exceeds the idea of having to replace concrete slabs every “X” amount of years. The concept of having a strong enough base beneath the brick paver is what results in longevity and a low maintenance project. When discussing modern day paver patios and driveways, the process should be fulfilled by trained professionals with ample experience. The cost benefit analysis of paver patios is impacted tremendously in a negative way when the project is not installed correctly, the first time. When the project isn’t fulfilled by a reputable contractor, the already costly project can become an even larger cost to project doers when not selecting the most qualified contractor. “It’s The Brick Guys” is  committed to delivering a structurally sound project that not only looks great, but is rather low maintenance.

21AA crushed limestone is 100% natural stone that is crushed down to < 1’’. This type of stone should be used for brick paver projects and is a prominent variable for a successful project. There are several different types of base materials that contractors use, however, 21AA crushed limestone is vital for longevity. Compaction is the process of pushing all the base particles closer together by squeezing out the air and moisture to increase the density of the base. Compaction is a very important step of the overall project and to achieve good compaction, you must use the type of compaction machine that provides the proper force, amplitude, and frequency. Installing the base must be installed and compacted in even layers to ensure maximum density.

Where will the water go?

After the 21AA base is installed, the next step is to form the slope (water run off). The slope must create a natural water runoff that reroutes water away from the pavers and home. The slope will be formed using 21AA sand throughout the entire top surface of the 21AA stone base. This sand will endure the same compaction process as the 21AA stone. Depending on the physical location of the paver install, on average, there should be a ½ inch slope for each 4 feet of pavers. Once the base and sub-paver sand is installed and calibrated, it is now time to start laying down the brick pavers. Pavers should be laid starting in the corner or near a straight edge. This will help ensure that each paver is laid symmetrically and has a consistent water pitch.

The most popular patterns are the Running Bond, Herringbone, and the Two by Two (2 vertical 2 horizontal). Using a height string as a guide when laying down the pavers, will help ensure consistency. Pavers should be laid down in full, prior to making any cuts -this will ensure tight fitment after making cuts for edging. In terms of aesthetics, too many cuts reduce the quality of the finished project. The least number of cuts that are made on a project, the better it usually looks. A lack of craftsmanship will show once a paver patio is finished. At the end of the day, when installed correctly; laying down pavers is no different than completing a puzzle. There is only one way to lay down and complete a puzzle. There are no imperfections in a puzzle once it is completed. In the same way that once a paver patio is installed correctly, there shouldn’t be an excessive number of pavers that were cut down into micro sized pieces to make everything “fit”. True craftsmanship means knowing exactly how to make all the pavers fit, using as many full-sized pieces as possible, with the least number of cuts. You can rely on us to make sure all of these steps are carried out accordingly on every single project.

Once all the pavers are installed and cut to spec, the next step is to install the joint sand in between each paver. The best type of sand to withstand freezing temperatures, is a type of sand called polymeric. Polymeric sand is a unique mixture of fine sands combined with other additives such as polymers, that bind together and harden when activated with water. Polymer is the active ingredient and begins its binding process at the molecular level. The compounding process that takes place when using a high-grade polymeric sand, forms a physical unity between all pavers with multiple benefits. It improves durability, deters weeds from growing between pavers, resistant to ants, and of course aesthetics; there are many different color patterns to choose from. The sand should be spread evenly using a push broom. Sweeping in all directions is vital in order to make sure all crevasses are filled with the sand. The plate compactor should also be used in this stage. This will ensure the sand particles have a tight bond prior to the activation process. Prior to setting the sand with water, it is important that the surface of the pavers be free of sand, because any excess will harden on the surface of the paver and cause discoloration. Using a leaf blower will help remove excess sand. Once the surface is completely free of any sand, it is now time to lightly mist the pavers with a garden hose. The activation process may take anywhere between 24-48 hours to completely cure/harden. The sands elasticity is made to expand and contract with the seasons of the year. The longevity of the sand joints are directly proportionate to installation process and climate.